Wire Set for the Hexagonal Beam by K4KIO
Here is a wire set for one band of the Hexagonal Beam by K4KIO. Made of 14 gauge PVC insulated 168 strand Flex weave, it is easy to handle and tangle
free. Each element is precisely measured and cut, the lugs crimped and soldered. The cords shown are strong, no stretch, Kevlar with a Dacron cover for UV
protection. The cords also are precisely measured for optimal performance, cut and attached to the wires and the junctions are covered with UV resistant
heat shrink. The PVC insulation protects the wire from saltwater corrosion.
free. Each element is precisely measured and cut, the lugs crimped and soldered. The cords shown are strong, no stretch, Kevlar with a Dacron cover for UV
protection. The cords also are precisely measured for optimal performance, cut and attached to the wires and the junctions are covered with UV resistant
heat shrink. The PVC insulation protects the wire from saltwater corrosion.
| Insulated Tip Spacer cord |
There is one of these for each band equipped on your
beam.The lugs are bolted onto the terminals on the
center post and the wire assembly is attached to each
of the six spreaders to form the unique shape of the
hexagonal beam.
Spreaders
Reflector
| Tip Spacer Cord |
| 1/2 Driver wire |
Terminals
| Beam Direction |
Base
plate
plate
| Over head view of a single band hexagonal beam |
Reflector wire
1/2 Driver wire
1/2 Driver wire
| Insulated Tip Spacer cord |
| Insulated Tip Spacer cord |
Hours: Mon - Fri 8:30 - 5:00 CT
Sales & Support: 1-888-694-3923 (Toll Free)
E mail: kio@k4kio.com
Sales & Support: 1-888-694-3923 (Toll Free)
E mail: kio@k4kio.com
 | |  | |  | |  | |  |
KIO Technology